Follow

Submissions from 2012

PDF

Effects of Processing Residual Stresses on Fatigue Crack Growth Behavior of Structural Materials: Experimental Approaches and Microstructural Mechanisms, Christopher J. Lammi and Diana Lados

Submissions from 2011

PDF

Localized Recrystallization in Cast Al-Si-Mg Alloy During Solution Heat Treatment: Dilatometric and Calorimetric Studies, S. K. Chaudhury, V. Warke, S. Shankar, and Diran Apelian

PDF

Solution Treatment Effects on Microstructure and Mechanical Properties of Al-(1 to 13 Pct)Si-Mg Cast Alloys, Diana A. Lados and Diran Apelian

PDF

Aging Effects on Heat Treatment Response and Mechanical Properties of Al-(1 to 13 Pct)Si-Mg Cast Alloys, Diana A. Lados, Diran Apelian, and Libo Wang

PDF

Recent Advances in Microdevices for Transportation Industry, Ryszard J. Pryputniewicz

PDF

Numerical Simulation and Experimental Validation of Residual Stresses in Water-Quenched Aluminum Alloy Castings, Bowang Xiao, Keyu Li, Qigui Wang, and Yiming Rong

PDF

An Experimental Study of Heat Transfer During Forced Air Convection, Bowang Xiao, Gang Wang, Qigui Wang, Mohammed Maniruzzaman, Yiming Rong, and Richard D. Sisson Jr.

Submissions from 2010

PDF

Investigation of Rarefied Supersonic Flows Into Rectangular Nanochannels Using a Three-Dimensional Direct Simulation Monte Carlo Method, Nikolaos A. Gatsonis

Submissions from 2009

PDF

Estimation of Spatially Distributed Processes Using Mobile Spatially Distributed Sensor Network, Michael A. Demetriou and Islam I. Hussein

PDF

Effect of Alloy Composition on Carburizing Performance of Steel, Olga K. Rowan and Richard D. Sisson Jr.

PDF

A Model for Converting Dilatometric Strain Measurements to the Fraction of Phase Formed During the Transformation of Austenite to Martensite in Powder Metallurgy Steels, Virendra S. Warke, Richard D. Sisson, and Makhlouf M. Makhlouf

Submissions from 2008

PDF

Lotka-Volterra Systems in Environments with Randomly Disordered Temporal Periodicity, Arvid Naess, Mikhail F. Dimentberg, and Oleg Gaidai

PDF

Comparing Mathematical and Heuristic Approaches for Scientific Data Analysis, Aparna S. Varde, Shuhui Ma, Mohammed D. Maniruzzaman, David C. Brown, Elke A. Rundensteiner, and Richard D. Sisson Jr.

Submissions from 2007

PDF

A Methodology to Predict the Effects of Quench Rates on Mechanical Properties of Cast Aluminum Alloys, Shuhui Ma, Mohammed D. Maniruzzaman, D. S. Mackenzie, and Richard D. Sisson Jr.

Submissions from 2006

PDF

Reza Abbaschian - 2006 President of, ASM International, Diran Apelian

PDF

Effects of Rapid Heating on Solutionizing Characteristics of Al-Si-Mg Alloys Using a Fluidized Bed, S. K. Chaudhury and Diran Apelian

PDF

Fluidized Bed Heat Treatment of Cast Al-Si-Cu-Mg Alloys, S. K. Chaudhury and Diran Apelian

PDF

Carbon Diffusion in Steels: a Numerical Analysis Based on Direct Integration of the Flux, Olga Karabelchtchlkova and Richard D. Sisson Jr.

PDF

The Effect of Residual Stress on the Fatigue Crack Growth Behavior of Al-Si-Mg Cast Alloys - Mechanisms and Corrective Mathematical Models, Diana A. Lados and Diran Apelian

PDF

Fatigue Crack Growth Mechanisms At the Microstructure Scale in Al-Si-Mg Cast Alloys: Mechanisms in Regions II and III, Diana A. Lados, Diran Apelian, and J. Fred Major

PDF

Authors' Reply to Reply of Discussion on "Nucleation Mechanism of Eutectic Phases in Aluminum-Silicon Hypoeutectic Alloys", S. Shankar and Makhlouf M. Makhlouf

PDF

Guest Editorial, Yongho Sohn, Carelyn Campbell, John E. Morral, and Richard D. Sisson

Submissions from 2005

PDF

Pup Suckling Is More Rewarding Than Cocaine: Evidence From Functional Magnetic Resonance Imaging and Three-Dimensional Computational Analysis, Craig F. Ferris, Praveen Kulkarni, John M. Sullivan Jr., Josie A. Harder, Tara L. Messenger, and Marcelo Febo

PDF

Singular Control-Invariance PDEs for Nonlinear Systems, Nikolaos Kazantzis and Michael A. Demetriou

Submissions from 2004

PDF

A Self-Learning Coupled Map Lattice for Vortex Shedding in Cable and Cylinder Wakes, G. Balasubramanian, D. J. Olinger, and Michael A. Demetriou

PDF

Lubricant Pyrolysis During Sintering of Powder Metallurgy Compacts, M. M. Baum, R. M. Becker, A. M. Lappas, J. A. Moss, Diran Apelian, D. Saha, and V. A. Kapinus

PDF

A Growth Pathway for Highly Ordered Quantum Dot Arrays, Jianyu Liang, Hailin Luo, Rod Beresford, and Jimmy Xu

PDF

Yield Behavior of Commercial Al-Si Alloys in the Semisolid State, Q. Y. Pan, Diran Apelian, and A. N. Alexandrou

PDF

Casting of Aluminum-Based Wrought Alloys Using Controlled Diffusion Solidification, Deepak Saha, Sumanth Shankar, Diran Apelian, and Makhlouf M. Makhlouf

PDF

Eutectic Solidification of Aluminum-Silicon Alloys, S. Shankar, Y. W. Riddle, and Makhlouf M. Makhlouf

Submissions from 2003

PDF

Focused Ion Beam Milling: A Practical Method for Preparing Cast Al-Si Alloy Samples for Transmission Electron Microscopy, S. Shankar, Y. W. Riddle, and Makhlouf M. Makhlouf

PDF

FEM Modeling of Induction Hardening Processes in Steel, J. Yuan, J. Kang, Yiming Rong, and Richard D. Sisson Jr.

Submissions from 2002

PDF

A Model-Based Fault Detection and Diagnosis Scheme for Distributed Parameter Systems: A Learning Systems Approach, Michael A. Demetriou

PDF

Lotka-Volterra System in a Random Environment, Mikhail F. Dimentberg

PDF

Investigation of Fatigue Crack Initiation in Ti-6Al-4V During Tensile-Tensile Fatigue, Svetlana G. Ivanova, Ronald R. Biederman, and Richard D. Sisson Jr.

PDF

Mathematical Modeling and Computer Simulation of the Rotating Impeller Particle Flotation Process: Part I. Fluid Flow, Mohammed D. Maniruzzaman and Makhlouf M. Makhlouf

PDF

Mathematical Modeling and Computer Simulation of the Rotating Impeller Particle Flotation Process: Part II. Particle Agglomeration and Flotation, Mohammed D. Maniruzzaman and Makhlouf M. Makhlouf

PDF

Die Soldering: Mechanism of the Interface Reaction Between Molten Aluminum Alloy and Tool Steel, Sumanth Shankar and Diran Apelian

Submissions from 2001

PDF

Finite-Element Modeling of Extraordinary Magnetoresistance in Thin Film Semiconductors with Metallic Inclusions, J. Moussa, L. R. Ram-Mohan, John M. Sullivan Jr., T. Zhou, D. R. Hines, and S. A. Solin

PDF

Characterization of the Kinetic and Mechanistic Differences Between Free-Surface and Bulk Grain Growth in WC-Co Materials, J. M. Olson and Makhlouf M. Makhlouf

Submissions from 2000

PDF

New Test Methodology for Static and Dynamic Shape Measurements of Microelectromechanical Systems, Gordon C. Brown and Ryszard J. Pryputniewicz

PDF

Absolute Shape Measurements Using High-Resolution Optoelectronic Holography Methods, Cosme Furlong and Ryszard J. Pryputniewicz

PDF

Structure-Enhanced Yield Stress of Magnetorheological Fluids, X. Tang, X. Zhang, R. Tao, and Yiming Rong

Submissions from 1999

PDF

The Effect of Ion Implanting on Hydrogen Entry into Metals, S. C. Chou and Makhlouf M. Makhlouf

PDF

Resonant Oscillation of a Liquid Metal Column Driven by Electromagnetic Lorentz Force Sources, Sergey N. Makarov, Reinhold Ludwig, and Diran Apelian

PDF

Erratum: A Low-Order Model for Vortex Shedding Patterns Behind Vibrating Flexible Cables (Vol 10, Pg 1953, 1998), David J. Olinger

Submissions from 1998

PDF

Utilization of Coupling Effects in Compensator Design for Structural Acoustic Systems, H. T. Banks, Michael A. Demetriou, and R. C. Smith

PDF

Holographic Microscope for Measuring Displacements of Vibrating Microbeams Using Time-Averaged, Electro-Optic Holography, Gordon C. Brown and Ryszard J. Pryputniewicz

PDF

Hybrid Computational and Experimental Approach for the Study and Optimization of Mechanical Components, Cosme Furlong and Ryszard J. Pryputniewicz

PDF

A Low-Order Model for Vortex Shedding Patterns Behind Vibrating Flexible Cables, David J. Olinger

Submissions from 1994

PDF

Reengineering Engineering-Education: Paradigms and Paradoxes, Diran Apelian

PDF

Thermal Degradation of Foamed Polymethyl Methacrylate in the Expendable Pattern Casting Process, S. Mehta and Satya S. Shivkumar

PDF

Impact Properties of A356-T6 Alloys, Satya S. Shivkumar, S. Wang, and C. Keller

PDF

Isothermal Oxidation of Physical Vapor-Deposited Partially-Stabilized Zirconia Thermal Barrier Coatings, Y. H. Sohn, Ronald R. Biederman, and Richard D. Sisson Jr.

Submissions from 1993

PDF

Paradigm Shift in Materials Processing - The Intelligent Processing Revolution, Diran Apelian

PDF

A Low-Dimensional Model for Chaos in Open Fluid-Flows, David J. Olinger

Submissions from 1989

PDF

The Source of 2nd Moment in Dilute Granular Flows of Highly Inelastic Spheres, Mark W. Richman

Submissions from 1988

PDF

Plane Simple Shear of Smooth Inelastic Circular Disks - The Anisotropy of the 2nd Moment in the Dilute and Dense Limits, J. T. Jenkins and Mark W. Richman

Submissions from 1985

PDF

A Transmission Electron-Microscopy Study of RF-Magnetron-Sputtered and DC-Magnetron-Sputtered Thin-Film Chromium and Chromium Platinum Coatings, M. R. Fishkis, Richard D. Sisson Jr., and Ronald R. Biederman

PDF

Heterodyne Holography Applications in Studies of Small Components, Ryszard J. Pryputniewicz

PDF

Holographic-Interferometry - the 20th Anniversary, Ryszard J. Pryputniewicz

PDF

Pulsed Laser Holography in Studies of Bone Motions and Deformations, Ryszard J. Pryputniewicz

PDF

Time Average Holography in Vibration Analysis, Ryszard J. Pryputniewicz

PDF

Summary Abstract - Quantitative Phase-Analysis of Partially Stabilized Zirconia-8.5-Percent Yttria by a Random Fitting Least Chi-Squared Method, Ichiro Sone, Richard D. Sisson Jr., and Ronald R. Biederman

Submissions from 1980

PDF

Determination of Sensitivity Vectors in Hologram Interferometry From Two Known Rotations of the Object, Ryszard J. Pryputniewicz and Karl A. Stetson