Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science
The fatigue crack growth (FCG) behavior of various types of alloys is significantly affected by the presence of residual stress induced by manufacturing and post-manufacturing processes. There is a qualitative understanding of the effects of residual stress on fatigue behavior, but the effects are not comprehensively quantified or accounted for. The difficulty in quantifying these effects is largely due to the complexity of residual-stress measurements (especially considering that parts produced in similar conditions can have different residual-stress levels) and the lack of mathematical models able to convert experimental data with residual stress into residual-stress-free data. This article provides experimental, testing, and mathematical techniques to account for residual-stress effects on crack growth rate data, together with two methods for eliminating residual stresses in crack growth test specimens. Fracture- mechanics concepts are used to calculate, in simple and convenient ways, stress-intensity factors caused by residual stresses. The method is advantageous, considering that stress-intensity factors are determined before the actual test is conducted. Further on, residual-stress-intensity factors are used to predict the residual-stress distribution in compact tension (CT) specimens prior to testing. Five cast Al-Si-Mg alloys with three Si levels (in unmodified (UM) as well as Sr-modified (M) conditions) were analyzed both with and without residual stress. Fatigue cracks are grown under both constant stress ratio. R = 0.1, and constant maximum stress-intensity factor, K-max = const., conditions. The mechanisms involved in crack growth through residual-stress fields are presented.
Lados, Diana A.
, Apelian, Diran
(2006). The Effect of Residual Stress on the Fatigue Crack Growth Behavior of Al-Si-Mg Cast Alloys - Mechanisms and Corrective Mathematical Models. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 37A, 133-145.
Retrieved from: http://digitalcommons.wpi.edu/mechanicalengineering-pubs/1
First Page Number
Last Page Number
Copyright 2006, ASM International. This paper was published in Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science Vol. Iss. 1 pp. 133-145 and is made available as an electronic reprint with the permission of, ASM International. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplications of any material in this paper for a fee or for commercial purposes, or modification of the content of this paper are prohibited.