Nicoletti, Denise W.
The purpose of this project was to design a DSP based loudspeaker correction processor. To accomplish this task, we measured the frequency response of loudspeakers and used MATLAB to design correction filters that would correct the response within a +/- 1dB tolerance from 200Hz to 20kHz. We then implemented the filters to the DSP evaluation board. Frequency response measurements and blind listening tests were used to judge the effectiveness of our design.
Worcester Polytechnic Institute
Major Qualifying Project
Access to this report is limited to members of the WPI community. Please contact a project advisor or their department to request access
Restricted-WPI community only
Electrical and Computer Engineering